75 Hp (55 KW) Soft Starter, 240v/440v/480v/660v
Why buy from us?
Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Ask a Question About This Product
75 Hp (55 KW) Soft Starter, 240v/440v/480v/660v
from
Save
-11%
$579.16
$649.00
Ex Tax: $579.16
- Stock: In Stock
- Model: HZTOHZ-G48
- Weight: 1.00
- SKU: HZTOHZ-G48
Available Options
Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.
Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.
$352.31 $399.00
Ex Tax:$352.31
$619.62 $699.00
Ex Tax:$619.62
$1,168.43 $1,329.00
Ex Tax:$1,168.43
$367.93 $419.00
Ex Tax:$367.93
$1,219.51 $1,399.00
Ex Tax:$1,219.51
$1,299.31 $1,469.00
Ex Tax:$1,299.31
$389.21 $459.00
Ex Tax:$389.21
$1,379.53 $1,529.00
Ex Tax:$1,379.53
$162.46
Ex Tax:$162.46
$206.49
Ex Tax:$206.49
$195.82
Ex Tax:$195.82
$292.46
Ex Tax:$292.46
$218.69
Ex Tax:$218.69
75 hp motor soft starter, 55 kW three phase 240v, 440v, 480v, 660v for selection.
| Model | GS2-055 (240v), GS3-055 (440v), GS4-055 (480v), GS6-055 (660v). | ||
| Capacity | 75 hp (55 kw) | ||
| Current | 110 amps at 440v/480v, 230 amps at 240v, 70 amps at 690v | ||
| Weight | 5 kgs | ||
| Dimension | 270*146*160 mm | ||
| Input | Voltage | 3 phase 240v, 440v, 480v, 660v AC | |
| Frequency | 50Hz/ 60Hz | ||
| Adaptive Motor | Squirrel-cage three-phase asynchronous motor | ||
| Starting Times | It is recommended not to exceed 20 times per hour. | ||
| Communication | DB9 interface, male plug, ① is RS485+, ⑥ is RS485- | ||
| Control Mode | (1) Operation panel control. (2) Operation panel + external control. (3) External control. (4) External control + COM control. (5) Operation panel + external + COM control. (6) Operation panel + COM control. (7) COM control. (8) No start or stop operation. | ||
| Start Mode | (1) Current-limiting to start. (2) Voltage ramp to start. (3) Torque control + current-limiting to start. (4) Torque control + voltage ramp to start. (5) Current ramp to start. (6) Voltage current-limiting double closed-loop start. | ||
| Stop Mode | (1) Soft stop. (2) Free stop. | ||
| Protective Function | (1) Open loop protection for external instantaneous stop terminals. (2) Over-heat protection for soft starter. (3) Protection for too long starting time. (4) Input open phase protection. (5) Output open phase protection. (6) Unbalanced three-phase protection. (7) Starting over current protection. (8) Running overload protection. (9) Under voltage protection for power voltage. (10) Overvoltage protection for power voltage. (11) Protection for fault parameter setting of the soft starter. (12) Load short circuit protection. (13) Auto restart or incorrect wiring protection. (14) Incorrect wiring protection of external control stop terminals. | ||
| Ambient | Place to be used | Indoor location with good ventilation free from corrosive gas and conductive dust. | |
| Altitude | Below 1000M. It has to increase the soft starter rate power when the altitude is more than 1000M. | ||
| Temperature | -30 +55 oC | ||
| Humidity | 90%RH without dew condensation. | ||
| Vibration | <0.5G | ||
| Structure | Enclosure | IP 20 | |
| Cooling | Natural wind cooling. | ||
Tips: Can a soft starter control the induction motor in variable speed?
A soft starter can NOT control induction motor speed, it only restricts motor starting current by applying the voltage in a ramp to avoid inrush current impact on the motor. To vary the speed, you should go for a variable frequency drive which can control the induction motor speed along with starting torque, but cost much more than a soft starter. The selection between VFD and soft starter depends on lots of factors, you can check our blog post regarding VFD vs Soft Starter for details.
Builder in Product TAB
NEW! Since Journal 3.2, the much improved T.A.B (Tabs Accordion Blocks) system supports the page builder inside the tab content. Unlimited Blocks, Tabs or Accordions with any HTML content or the builder interface (supporting custom rows/columns/modules) can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc.
You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.