1hp (0.75kW) VFD, 3 Phase 230V, 400V, 480V
Why buy from us?
Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Ask a Question About This Product
1hp (0.75kW) VFD, 3 Phase 230V, 400V, 480V
from
Save
-23%
$206.49
$267.30
Ex Tax: $206.49
- Stock: In Stock
- Model: HZTOHZ-G28
- Weight: 1.00
- SKU: HZTOHZ-G28
Available Options
Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.
Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.
$196.32 $220.00
Ex Tax:$196.32
$159.32 $199.60
Ex Tax:$159.32
$149.10 $197.00
Ex Tax:$149.10
$463.25 $549.00
Ex Tax:$463.25
$992.32 $1,109.98
Ex Tax:$992.32
$3,197.41 $3,573.00
Ex Tax:$3,197.41
$162.46
Ex Tax:$162.46
$206.49
Ex Tax:$206.49
$195.82
Ex Tax:$195.82
$292.46
Ex Tax:$292.46
$218.69
Ex Tax:$218.69
1 hp variable frequency drive, three phase 50Hz/60Hz 220V, 230V, 240V, /380V, 400V, 415V, 480V.
Specification:
| Basics | Model | GK3000-4T0007G/ GK3000-2T0007G |
| Capacity | 1 hp (0.75 kW) | |
| Shipping weight | 2 kg | |
| Dimension | 184*98*135 mm | |
| I/O Feature | Rated current | 2.1A at 380V ~ 480V, 3.8A at 220V ~ 240V |
| Input voltage | 3 phase 230V /400V /480V AC ±15% (Optional) | |
| Input frequency | 50Hz/ 60Hz | |
| Output voltage | 3 phase AC 0~input voltage | |
| Output frequency | 0.00~400.00Hz | |
| Over load capacity | 150% of rated current for 1 minute, 180% of rated current for 3 seconds | |
| Control Feature | Control mode | V/F control; Sensorless vector control; |
| Communication | RS485 | |
| Speed regulation | 1:100 | |
| Start torque | 150% of rating torque at 1 Hz | |
| Speed control accuracy | ≤±0.5% of rating synchronous speed | |
| Frequency precision | Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2% | |
| Frequency resolution | Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz | |
| Torque boost | Automatic torque boost, manual torque boost 0.1%~30.0% | |
| Interior PID controller | Be convenient to make closed-loop system | |
| Automatic energy save running | Optimize V/F curve automatically based on the load to realize power save running | |
| Automatic voltage regulation (AVR) | Can keep constant output voltage when power source voltage varies. | |
| Automatic current limiting | Limit running current automatically to avoid frequent over-current which will cause trip | |
| Environment | Enclosure rating | IP 20 |
| Temperature | –10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5% | |
| Humidity | 5%-95%, without condensation | |
| Altitude | ≤1000m; VFD will be derated if above 1000m | |
| Impingement and oscillation | Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g) | |
| Store environment | –20℃~ +60℃; no dust, no corrosive gas, no direct sunlight |
Tips: Can a VFD run on 400Hz?
Variable frequency drive (VFD) running on 400 Hz is not a problem as most VFDs can provide that output frequency but some may require a firmware modification to go that high. That high of an output frequency would also require a carrier frequency of at least 4 to 4.8 kHz as the ratio is required to be at least 1 to 10 but 1 to 12 is better. With that being said, the higher carrier frequency would require most VFDs to be derated a little bit.
Builder in Product TAB
NEW! Since Journal 3.2, the much improved T.A.B (Tabs Accordion Blocks) system supports the page builder inside the tab content. Unlimited Blocks, Tabs or Accordions with any HTML content or the builder interface (supporting custom rows/columns/modules) can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc.
You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.